Flat panel displays used to be a stand up furniture that had the cathode ray screen, which is not used to seize the opportunity to win the flat screen. But there are more systems, such as the display system built into a cabinet or system hang on the wall with a bracket. Here's helpful information with all the steps to mount a flat screen installation. Be sure to follow installation instructions carefully and be sure to use more than required to support the weight of the screen!
Also, I recommend that you connect the cables before you lift the panel to hang even before putting it into the mounting bracket. Often, the connectors are on the back or underneath and can be difficult to achieve once mounted screen.
Here's a tips on flat screen installation:
Your flat screen TV should be installed at the same height a canvas of equivalent size. Depending on the height of the coat or the top of the fireplace, hang the screen from four to twelve inches above the fireplace. If the mantle is at a height greater than four feet, place the screen at a distance of up to 6" of the mantle.
Normally, the TV screen should be at eye level when you sit, given the additional height, it is best to install the screen on a wall mount bracket swivel and tilt, which you will adjust the angle to avoid a stiff neck and will provide a good view of all points of the room.
Before drilling the mounting holes, it is suggested to focus the screen and adjust the height and the optimal location using a cardboard template the size of your screen on the wall with tape; evaluate , from the sitting position, height and viewing angle most comfortable.
Here are some other points to consider when installing a screen above the fireplace:
* Leave the installation of the screen to a specialist or make sure at least of some help, as some flat-screen TVs weighing over 50 kilos.
* To be safe, secure the mounting bracket on two structural amounts.
* Check the level of heat emanating from your home, as this can greatly affect its durability. To do this, start a fire, wait a bit and put your hand in the chosen location to install the screen. If the heat goes far beyond room temperature, it is best to place the TV somewhere else in the room.
Make your LCD-TV into a monitor.
What is an LCD TV? A liquid crystal is something so amazing that something between a liquid and crystal. In its liquid form are molecules mixed in a mess and have no fixed positions, however, they have the orientation that is determined so that the pointing in one direction. It is this characteristic that is used to create an LCD-TV installation. By varying the strength of the current through the crystal can have crystal molecules to twist and drop through the right amount of light and thus vary their brightness. The technology used in everyday life everywhere.
When you connect your PC to the TV, there are now many ways to go. There are a wide variety of ports to use, depending on the TV and computer (and graphics) you have. No matter what you use cables to connect your computer, you assume that you have to do settings for your video card, so that the video card knows that there is a TV connected and that you want to send signal to it. Some modern computers today has HDMI output on the graphics card, and you have a flat screen TV with HDMI input, use this connection as it provides the best quality. Some flat-screen TV has a VGA input, so you can connect your TV as a regular monitor to the graphics card's VGA port. Furthermore, there are video card that has a TV-out connector RCA-type (usually a round yellow plug) that you plug into your TV's composite port (there is usually three RCA ports, yellow for video and red, white / black for stereo sound).
The most common connector on a graphics card's S-video. This connector is round and usually has four pins. This can either connect directly to the TV's S-video input, if available; otherwise you will need an adapter that converts S-video to composite. These are available from most radio dealer. In addition to connect the graphics card you also need to connect the audio from your PC to your TV. You do this by using a cord at one end is a 3.5mm stereo jack and the other two RCA connectors (red and white / black). These connect to your TV's audio input.
If you want to use scart instead of RCA connectors on the TV, there's a smart adapter called Scart adapter C +. You'll get all kinds of cords which you need LCD-TV installation. Among other things, you will get a cable at one end has S-video and stereo jack that you plug into your computer, and at the other end sits a Scart connector.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.